| Peer-Reviewed

Investigation on Application of Support Vector Machine Algorithm in the Experimental Simulation System for Mechanism Motion Reliability

Received: 13 March 2017     Published: 15 March 2017
Views:       Downloads:
Abstract

The complexity of the mechanism brings great difficulty to the calculation of the mechanism motion reliability, and the computer simulation algorithm based on Monte Carlo method needs a great number of simulation. The further-development of LMS Virtual. Lab was carried out, and the least square support vector machine algorithm was used to construct the response surface proxy model. The PSO-GA algorithm is used to optimize the parameters and make the least square support vector machine own a better performance. For the coupling of multiple failure modes, the multiple response surfaces are combined to obtain the reliability of the system. The reliability calculation based on support vector machine algorithm is carried out for the crank slider mechanism and the cam swing bar mechanism, and the feasibility and efficiency of the method are verified by the Monte Carlo method.

Published in Science Discovery (Volume 5, Issue 1)
DOI 10.11648/j.sd.20170501.13
Page(s) 12-18
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Reliability, Simulation, Support Vector Machine, Response Surface Models

References
[1] Athanasios, P. D., and T. Bartzanas. 2010. Soil Engineering. Berlin: Springer.
[2] Chang, Y. C., and J. F. Reid. 1996. Characterization of a color vision system. Transactions of the Asabe, 39 (1): 263-273.
[3] Cordill, C., and T. E. Grift. 2011. Design and testing of an intra-row mechanical weeding machine for corn. Biosystems Engineering, 110 (3): 247-252.
[4] Eleftheriadis, A., and A. Jacquin. 1995. Automatic face location detection for model-assisted rate control in H.261-compatible coding of video. Signal Processing Image Communication, 7 (4): 435-455.
[5] Gonzalez, R., and R. E. Woods. 1992. Digital Image Processing. Boston: Addison-Wesley Publishing Company.
[6] Hemming, J., and T. Rath. 2001. Computer-vision-based weed identification under field conditions using controlled lighting. Journal of Agricultural Engineering Research, 78 (3): 233-243.
[7] Li, Y., and H. L. Chen. 2013. Optimal spatial scale for crop-weed discrimination. Transactions of the Chinese Society of Agricultural Engineering, 29 (16): 159-165.
[8] Li, Y. L., and Q. W. Jia. 2011. Weed occurrence regularity and chemical control technology in corn field. Modern Agricultural Sciences and Technology, 21: 206-207.
[9] Long, M. S., and D. J. He. 2007. Weed identification from corn seedling based on computer vision. Transactions of the CSAE, 23 (7): 139-144.
[10] Maragos, P., and R. W. Schafer. 1987. Morphological filters-Part I: Their set-theoretic analysis and relations to linear shift-invariant filters. IEEE Transactions on Acoustics Speech & Signal Processing, 35 (8): 1153-1169.
[11] O’Dogherty, M. J., R. J. Godwin, A. P. Dedousis, J. L. Brighton, and N. D. Tillett. 2007. A mathematical model of the kinematics of a rotating disc for inter- and intra-row hoeing. Biosystems Engineering, 96 (2): 169-179.
[12] Persson, M., and B. Åstrand. 2008. Classification of crops and weeds extracted by active shape models. Biosystems Engineering, 100 (4): 484-497.
[13] Plataniotis, K. N., and A. N. Venetsanopoulos. 2000. Color Image Processing and Applications. Berlin: Springer.
[14] Robert, M. H., and G. S. Linda. 1992. Computer and robot vision. Boston: Addison-Wesley Publishing Company.
[15] Shearer, S. A., and R. G. Holmes. 1990. Plant identification using color co-occurrence matrices. Transactions of the Asae, 33 (6): 2037-2044.
[16] Tian, L. F., and D. C. Slaughter. 1998. Environmentally adaptive segmentation algorithm for outdoor image segmentation. Computers & Electronics in Agriculture, 21 (3): 153-168.
[17] Visser, R., and A. J. M. Timmermans. 1996. Weed-It: a new selective weed control system. Proceedings of SPIE - The International Society for Optical Engineering, 2907: 120-129.
[18] Woebbecke, D. M., G. E. Meyer, K. V. Bargen, and D. A. Mortensen. 1995. Shape features for identifying young weeds using image analysis. Transactions of the Asae, 38 (1): 271-281.
[19] Wu, X. M., Y. Q. Chen, Z. X. Li, X. P. Shi, B. B. Wang, W. S. Gao, and P. Sui. 2012. Research progress of maize planting spatial layout pattern. Journal of Maize Sciences, 20 (3): 115-121.
Cite This Article
  • APA Style

    Zhang Tong, Li Sen, Qiao Jia-dong. (2017). Investigation on Application of Support Vector Machine Algorithm in the Experimental Simulation System for Mechanism Motion Reliability. Science Discovery, 5(1), 12-18. https://doi.org/10.11648/j.sd.20170501.13

    Copy | Download

    ACS Style

    Zhang Tong; Li Sen; Qiao Jia-dong. Investigation on Application of Support Vector Machine Algorithm in the Experimental Simulation System for Mechanism Motion Reliability. Sci. Discov. 2017, 5(1), 12-18. doi: 10.11648/j.sd.20170501.13

    Copy | Download

    AMA Style

    Zhang Tong, Li Sen, Qiao Jia-dong. Investigation on Application of Support Vector Machine Algorithm in the Experimental Simulation System for Mechanism Motion Reliability. Sci Discov. 2017;5(1):12-18. doi: 10.11648/j.sd.20170501.13

    Copy | Download

  • @article{10.11648/j.sd.20170501.13,
      author = {Zhang Tong and Li Sen and Qiao Jia-dong},
      title = {Investigation on Application of Support Vector Machine Algorithm in the Experimental Simulation System for Mechanism Motion Reliability},
      journal = {Science Discovery},
      volume = {5},
      number = {1},
      pages = {12-18},
      doi = {10.11648/j.sd.20170501.13},
      url = {https://doi.org/10.11648/j.sd.20170501.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20170501.13},
      abstract = {The complexity of the mechanism brings great difficulty to the calculation of the mechanism motion reliability, and the computer simulation algorithm based on Monte Carlo method needs a great number of simulation. The further-development of LMS Virtual. Lab was carried out, and the least square support vector machine algorithm was used to construct the response surface proxy model. The PSO-GA algorithm is used to optimize the parameters and make the least square support vector machine own a better performance. For the coupling of multiple failure modes, the multiple response surfaces are combined to obtain the reliability of the system. The reliability calculation based on support vector machine algorithm is carried out for the crank slider mechanism and the cam swing bar mechanism, and the feasibility and efficiency of the method are verified by the Monte Carlo method.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Investigation on Application of Support Vector Machine Algorithm in the Experimental Simulation System for Mechanism Motion Reliability
    AU  - Zhang Tong
    AU  - Li Sen
    AU  - Qiao Jia-dong
    Y1  - 2017/03/15
    PY  - 2017
    N1  - https://doi.org/10.11648/j.sd.20170501.13
    DO  - 10.11648/j.sd.20170501.13
    T2  - Science Discovery
    JF  - Science Discovery
    JO  - Science Discovery
    SP  - 12
    EP  - 18
    PB  - Science Publishing Group
    SN  - 2331-0650
    UR  - https://doi.org/10.11648/j.sd.20170501.13
    AB  - The complexity of the mechanism brings great difficulty to the calculation of the mechanism motion reliability, and the computer simulation algorithm based on Monte Carlo method needs a great number of simulation. The further-development of LMS Virtual. Lab was carried out, and the least square support vector machine algorithm was used to construct the response surface proxy model. The PSO-GA algorithm is used to optimize the parameters and make the least square support vector machine own a better performance. For the coupling of multiple failure modes, the multiple response surfaces are combined to obtain the reliability of the system. The reliability calculation based on support vector machine algorithm is carried out for the crank slider mechanism and the cam swing bar mechanism, and the feasibility and efficiency of the method are verified by the Monte Carlo method.
    VL  - 5
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China

  • School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China

  • School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China

  • Sections